Stresstech co-operates with universities and research institutes by developing studies with the research community and collecting information on how to further improve products for the industry.

In this application note residual stress was measured on a magnesium sample with X-ray diffraction method.

Barkhausen noise automation have human, technical and industrial factors.

Barkhausen noise automation have human, technical and industrial factors

In this application study residual stress measurements performed with Xstress DR45 and Xstress G2R systems were compared. The measurements were done on a Jominy test bar that is used to test the hardenability of a material.

Since Barkhausen noise analysis is a comparative method, users need to determine acceptable measurement values for their products with the master sample procedure.

Crankshafts are one of the most common parts that can be analyzed with the Barkhausen noise method.

Camshafts are one of the most common parts that can be analyzed with Barkhausen noise.

Continuous movement in XRD residual stress measurement further reduces the measurement time.

Gears are one of the most common parts that can be analyzed with Barkhausen noise.