Xstress Profile

Xstress Profile enables residual stress and retained austenite depth profiling in one system with software-controlled movements.

Xstress Profile

Xstress Profile complements the Xstress DR45 diffractometer.

Xstress Profile is divided into two areas: one for safe X-ray measurements and one dedicated for electropolishing and depth measuring. The sample moves between the areas with a software controlled linear guide, Xstress Linear.

Xstress Profile is IEC 61010 standard compliant and safe for laboratory use. The doors are equipped with safety interlocks that prevent exposure to X-rays when the doors are open.

Xstress Profile

Features

X-ray diffraction measurement cabinet

Safeguarded area for X-ray measurements:
- Sheet metal covers (2 mm) and windows with 0.5 mm lead equivalent
- Two doors with safety interlocks
- LED lights
- Ventilated roof for free air flow measurement cabinet
Integrated electric cabinet
- Emergency stop button
- Fuse box
- Main power switch
- Electric strip with eight IEC connectors
Signal light tower
- Top red: Measurement on
- Middle orange: High voltage on
- Bottom white: Door open
Shelf for Xstress MU and system computer
Vertical storage area for excess cables
A rail for cables
Height-adjustable machine legs

Electropolishing and depth measuring cabinet

Safeguarded area for electropolishing and depth measuring:
- Sheet metal covers (2 mm) and windows with 0.5 mm lead equivalent
- Two doors with safety interlocks
- LED lights
- Ventilated roof for free air flow
A rail for cables
Adjustable shelf for electropolisher
Height-adjustable machine legs

Xstress Linear motorized X-axis

Xstress Linear drives the sample between X-ray measurement, depth measurement and electropolishing areas. Movements are software-controlled with high accuracy.

Please note: Requires MC1100 Motion Controller.

Enabling switch with cable

An enabling switch is a 3-position (OFF-ON-OFF) switch that allows Xstress Linear, Xstress Column (option) and Xstress XY (option) movements doors open only when the switch is lightly pressed and held in the middle position (position 2).