Barkhausen noise analysis in practice: Hardness detection
Barkhausen noise analysis gives a response to the hardness state.
This section presents application notes, technical articles, and research highlights that demonstrate how Stresstech measurement technologies are used in practice.

Barkhausen noise analysis gives a response to the hardness state.


Barkhausen noise gives a response to the residual stress state and reacts to both micro and macro stresses.


The measurement parameters need to be optimized for each sensor, material, and sample shape. These parameters are magnetizing power and magnetizing frequency.


Stresstech co-operates with universities and research institutes by developing studies with the research community and collecting information on how to further improve products for the industry.


In this application note residual stress was measured on a magnesium sample with X-ray diffraction method.


Barkhausen noise automation have human, technical and industrial factors.


Barkhausen noise automation have human, technical and industrial factors


In this application study residual stress measurements performed with Xstress DR45 and Xstress G2R systems were compared. The measurements were done on a Jominy test bar that is used to test the hardenability of a material.


Since Barkhausen noise analysis is a comparative method, users need to determine acceptable measurement values for their products with the master sample procedure.


Crankshafts are one of the most common parts that can be analyzed with the Barkhausen noise method.
